Zenith Screw Products - Qaulity Control

Zenith Screw Products, INC.
INSPECTION AND QUALITY CONTROL

Quality Control

ZSP’S QUALITY CONTROL DEPARTMENT IS MAINTAINED IN COMPLIANCE WITH MIL-I-45208. OUR QUALITY CONTROL MANUAL HAS BEEN APPROVED BY GOVERNMENT SOURCES AS WELL AS NUMEROUS AEROSPACE MANUFACTURERS. IN ORDER TO MAINTAIN THE HIGHEST QUALITY POSSIBLE, ALL JOBS HAVE A ROUTE SHEET THAT IDENTIFIES EACH OPERATION TO BE PERFORMED AS WELL AS THE DATE EACH OPERATION SHOULD START AND FINISH. AFTER EACH OPERATION THE PARTS ARE INSPECTED TO INSURE THAT THE OPERATION HAS BEEN COMPLETED PER PRINT. ALL OPERATIONS AND INSPECTIONS, AS WELL AS MATERIALS, ARE TRACEABLE. RECORDS ARE STORED FOR THREE YEARS OR LONGER UPON REQUEST. SPC CAN BE IMPLEMENTED UPON REQUEST. WE INVITE YOUR SURVEY.

INSPECTION EQUIPMENT

(1) MITUTOYO CMM MOD. B504B
(3) 14" SCHERR-TUMICO COMPARITORS
(1) SURFACE PLATE 24" X 48"
(2) SURFACE PLATE 18" X 24"
(1) BENDIX PROFOLOMITER
(1) SUNNEN BORE GAGE #PG-800-E
(1) SUNNEN BORE GAGE #PG-800-S
(2) MITUTOYO HEIGHT GAGES
(2) GAGE BLOCK SET
(1) SHEFFIED OD GAGE
OD MICROMETERS 1" TO 16"
DEPTH MICROMETERS 1" TO 6"
INTERTEST .200-3.200"
HOLEMATIC .750-2.000"
VARIABLE MICROSCOPE 20-80 POWER
DELTRONIC PLUG GAGES FROM .0125 TO 1.4208 IN TENTHS
DUNDICK PLUG GAGES FROM .011 TO 1.500 IN THOUSANDS
THREAD RING AND PLUG GAGES FROM 0-80UNF TO 1.75-18UNF

ZENITH SCREW PRODUCTS INC.
10910 S. PAINTER AVE.
SANTA FE SPRINGS, CA 90670
(562) 941-0281 FAX (562) 941-7699

E-mail : ken@zspinc.com

pic5.gif (24628 bytes)